Ella 4Pin Din To 3 Pin XLR For Naim NAP250
Ella 4Pin Din To 3 Pin XLR For Naim NAP250 - Image 2

Ella 4Pin Din To 3 Pin XLR For Naim NAP250

5.00 out of 5
(1 customer review)

Price range: £120.00 through £220.00

SKU 6839020781626 Category Tag

Description

ELLA 4 PIN DIN TO 3 PIN XLR CABLE OCC SILVER INTERCONNECT FOR NAIM NAP 250

CARRIES LEFT & RIGHT CHANNEL
WELCOME TO THE NEW ELLA RANGE OF CABLES, DESIGNED FOR NAIM AUDIO SYSTEMS, BUILT HERE IN THE UK. 
WE HAVE NAMED THE ELLA RANGE AFTER  ELLA JANE FITZGERALD WHO WAS AN AMERICAN JAZZ SINGER, SOMETIMES REFERRED TO AS THE “FIRST LADY OF SONG AND “LADY ELLA”. SHE WAS NOTED FOR HER PURITY OF TONE, CLARITY & PRECISE DICTION, SHE REPRESENTS THE PERFORMANCE OF THIS NEW RANGE OF CABLES.
THE ENTIRE RANGE IS BUILT USING VERY THICK 20AWG OCC SINGLE CRYSTAL CONDUCTORS. THE DIELECTRIC IS TEFLON, WE USE COTTON SPACER, THE CABLES UTILISE A TWIN SHIELD OF MYLAR/ ALUMINIUM TAPE AND BRAIDED COPPER. THE OUTER INSULATION IS A SUPER SOFT AND FLEXIBLE SILICONE RUBBER, OVER THIS WE USE THE FLEXO NOISE REDUCTION SLEEVING.

THE CONNECTORS ARE MANUFACTURED BY DELTRON, METAL BODIED WITH SILVER PLATED HIGH QUALITY PINS. THE BUILD QUALITY OF THIS RANGE IS 2ND TO NONE, THE SINGLE CRYSTAL SILVER WITH A CROSS SECTION OF 0.75MM PER PIN PRODUCES THE SAME SOUND AS OUR NUBLU RANGE WITH EVEN LOWER CAPACITANCE.
 IN THE COMING DAYS WE WILL LAUNCH AN EXTENSIVE RANGE OF THESE INTERCONNECTS.
THIS INTERCONNECT IS MOSTLY USED BETWEEN POWER SUPPLY/PRE-AMP TO NAP250 AMPLIFIER

IMPORTANT!  PLEASE  NOTE THAT THIS IS FOR NAIM ONLY AND WILL NOT WORK WITH OTHER 4PIN DIN AUDIO DEVICES.
Please be sure to check your  device manual if not sure which cable you need.  Original PDF manuals and connection guides are available on the Naim web site.

1 review for Ella 4Pin Din To 3 Pin XLR For Naim NAP250

  1. 5 out of 5

    Robert Ballard (verified owner) –

    Regarding 4 PIN to 3 Pin XLR for 250 and 5 PIN SNAIC. New Ella interconnects arrived and are now burned in. Highly recommended. My impression – like getting a new set of amplifiers. More bass, smoother high frequency, punchy, better clarity and dynamics. No loss of PRAT, if anything it is even better. I liked my previous interconnects from Flashback Cable Sales, but this is another level as one would hope for the cost increase over Flashback. (Flashback sadly is gone now as the owner enjoys music in heaven.) System: 2 HiCap, 32.5, Prefix, 250. All regulator boards are from Avondale which brought more more Naim sound like I imagine the DR update would do if available for Chrome Bumper/Olive series. 250 amplifier boards from Witch Hat which also kept Naim sound while adding clarity and eliminating hiss. All unneeded boards removed from 32.5.

Add a review

Your email address will not be published. Required fields are marked *

ELLA 4 PIN DIN TO 3 PIN XLR CABLE OCC SILVER INTERCONNECT FOR NAIM NAP 250

CARRIES LEFT & RIGHT CHANNEL
WELCOME TO THE NEW ELLA RANGE OF CABLES, DESIGNED FOR NAIM AUDIO SYSTEMS, BUILT HERE IN THE UK. 
WE HAVE NAMED THE ELLA RANGE AFTER  ELLA JANE FITZGERALD WHO WAS AN AMERICAN JAZZ SINGER, SOMETIMES REFERRED TO AS THE “FIRST LADY OF SONG AND “LADY ELLA”. SHE WAS NOTED FOR HER PURITY OF TONE, CLARITY & PRECISE DICTION, SHE REPRESENTS THE PERFORMANCE OF THIS NEW RANGE OF CABLES.
THE ENTIRE RANGE IS BUILT USING VERY THICK 20AWG OCC SINGLE CRYSTAL CONDUCTORS. THE DIELECTRIC IS TEFLON, WE USE COTTON SPACER, THE CABLES UTILISE A TWIN SHIELD OF MYLAR/ ALUMINIUM TAPE AND BRAIDED COPPER. THE OUTER INSULATION IS A SUPER SOFT AND FLEXIBLE SILICONE RUBBER, OVER THIS WE USE THE FLEXO NOISE REDUCTION SLEEVING.

THE CONNECTORS ARE MANUFACTURED BY DELTRON, METAL BODIED WITH SILVER PLATED HIGH QUALITY PINS. THE BUILD QUALITY OF THIS RANGE IS 2ND TO NONE, THE SINGLE CRYSTAL SILVER WITH A CROSS SECTION OF 0.75MM PER PIN PRODUCES THE SAME SOUND AS OUR NUBLU RANGE WITH EVEN LOWER CAPACITANCE.
 IN THE COMING DAYS WE WILL LAUNCH AN EXTENSIVE RANGE OF THESE INTERCONNECTS.
THIS INTERCONNECT IS MOSTLY USED BETWEEN POWER SUPPLY/PRE-AMP TO NAP250 AMPLIFIER

IMPORTANT!  PLEASE  NOTE THAT THIS IS FOR NAIM ONLY AND WILL NOT WORK WITH OTHER 4PIN DIN AUDIO DEVICES.
Please be sure to check your  device manual if not sure which cable you need.  Original PDF manuals and connection guides are available on the Naim web site.