Banana Plug Tellurium Copper Gold Plated aeco ABP-1111, Set Of 4
PLEASE NOTE: THESE CONNECTORS ARE DESIGNED FOR USE WITH 4MM SOCKETS NOT 4.1MM
Lathed in one piece. Crosscutting part with spiral pattern design. Unique Design allows cable to be secured by grub screw or solder. Contact is completely insulated from outer shell High Purity copper directly Gold plated.
1.We recommend to peel off the cable jacket and appear conductor part about 6mm.
2.This product is suitable for cable OD which is less than 6.3mm. Please remove the sleeve(141) if the cable OD is more than 4.3mm.
3.Please put the cable through the shell(131)
4.1.For solder type:
Please remove the ring and the screw[211 / 212] before you solder the cable (without jacket) on L shape crosscutting.
4.2.For screw type:
Please lock the cable (without jacket) in the ring with a screw[211 / 212].
5.Please lock the shell on body set .
6.Please fix the cable and shell through screw[222 / 221].
Body: Tellurium Copper (#C14500 / copper contains over 99%)
Head lock: POM
Ring: Brass alloy (#C3604)
Shell: Brass alloy (#C3604)
Screw for conductor: Brass alloy (#C3604)
Screw for cable: Iron
Body: 10u" Gold plating (no nickel base)
Ring: 3u" Gold plating (no nickel base)
Screw for conductor: 3u" Gold plating (no nickel base)</p>
Contact resistance < 0.3 mOhm (It was test by ABI-0601.)
Biggest OD 9.0mm
Cable hole without sleeve 6.5mm
Cable hole with sleeve 4.5mm
Total Length 43.0mm
Recommend soldering temperature:
Temperature Soldering Iron, please keep 400 °C within 8~10 second.
Temperature Soldering Iron, please keep 450 °C within 8~10 second.
Please shore up the body by solder equipment to avoid the high temperature caused the POM lock head deformed.