These are some of the nicest 3.5mm TRS connectors on the market.
The contacts are machined from Tellurium Copper, directly plated inĀ Gold.
Concept
Shell between body isolate by insulator material. Depends on the method of processing, it can choose to make the shell be a conductor.
The conductor is made from high-purity tellurium copper without nickel base.
ā
By using highest quality of design techniques and material to provide customer who has “Hi-End” requirement.
Descriptionāā
The center pin is fixed to the POM insulator by assemble function
Ring and the end sleeve is separate by POM, then assemble with center pin.
Thereā s a hole between the contact pin and body structure.
To put the fillers into the gap of the body from the hole.
Use the POM latch through to fix the body.Ā Ā
The body and the shell locked by screwing.
POM sleeve is fixed with end of shell by using screw.
Noteļ¼
This product is include: screw for cable 3 mm*1pcs and 4 mm*1pcs.
Due to the 3.5mm plug size is small, the over soldering time will cause the insulator damage or swelling. Please process solder each channel based on recommend soldering temperature and condition.
This plug unable to contact with the adaptor which the ground is contact the sleeve conductor by shell.
ā
Assemblyļ¼
1. We recommend to peel off the cable jacket and per conductor wire insulation.
2.Depends on cable size to decide whether use sleeve (ID 4.5mm) [311], or without sleeve (ID6.5MM) [301].Then through into cable.
3.Contact the cable with per channel by soldering.
4.Lock the shell and body [203],
5. Please lock the cable and shell with a screw M3x4mm [321] or M3x3mm [322].ā
AT3-1331G
Contact pin : Gold platingĀ (no nickel base).
Body : GoldĀ plating (no nickel base).
ā
Insulator : None.
Head lock : None.
Shell : Satin Nickel + Topcoat.
Sleeve : None.
Screw : None.
ā
Electrical Characteristicsļ¼
Contact resistance < 1.0 mOhm
Dimensionļ¼
Biggest OD : 8.90 mm
Total Length : 42.3mm
Cable hole :
Sleeve contained in shell is 4.5mm.
Sleeve not contained in shell is 6.5mm.
Packageļ¼
Vacuum Bag(1Pcs)
place in the sponge then pack in the vacuum bag.
Recommend soldering temperatureļ¼
Contact pin (Tip)
Temperature Soldering Iron, please keepĀ 340 Ā°C within 4~7 second
Temperature Soldering Iron, please keepĀ 360 Ā°C Ā within 3~6 second
Temperature Soldering Iron, please keepĀ 380 Ā°C within 2~5 second
Temperature Soldering Iron, please keepĀ 400 Ā°C within 1~4 second
Body (Ring)
Temperature Soldering Iron, please keepĀ 340 Ā°C within 9~12 second
Temperature Soldering Iron, please keepĀ 360 Ā°CĀ within 6~9 second
Temperature Soldering Iron, please keepĀ 380 Ā°CĀ within 5~8 second
Temperature Soldering Iron, please keepĀ 400 Ā°CĀ Ā within 2~5 second
Body (Sleeve)
Temperature Soldering Iron, please keepĀ 340 Ā°CĀ within 6~9 second
Temperature Soldering Iron, please keepĀ 360 Ā°CĀ within 5~8 second
Temperature Soldering Iron, please keepĀ 380 Ā°C within 3~6 second
Temperature Soldering Iron, please keepĀ 400 Ā°CĀ within 2~5 second
Product production process comply with RoHS.
Product made new TW patent No. M581795.ā
Reviews
There are no reviews yet.